Rotex drive heads come in three configurations.
The drag link is a physical connection that attaches the screen box assembly to the machine base; this connection converts the gyratory motion created by the drive head to reciprocating motion for precise, near-size separation.
The top cover is the main point of access to the screen decks; by releasing the toolless compensating clamps and lifting the cover off, you can access the screen frames directly. Each deck must be removed for screen change-out. The screens are attached using Rotex tensioning clips, which automatically draw the correct tension on the screen clothing.
Inspection ports are located on the top cover of the machine. When the machine is stopped, you can easily remove the inspection cap and ensure the screener is operating correctly. This could include inspections for screen blinding, screen tears or material buildup.
Rotex customizes each machine configuration to match the exact application needs. Inlet connection options include:
Rotex customizes each machine configuration to match the exact application needs. Outlet connection options include:
Slide bearings are bearings where only sliding friction is generated. The shaft is generally supported by the sliding surface, with oil and air in between to facilitate sliding movement. Sliding bearings are lightweight and have a long operating life while introducing minimal vibrations or noise.
The APEX™ discharge chute offers easily accessible outlets and customizable outlet configurations. Outside of the outlets, you can also customize the discharge chute by adding hinges to improve accessibility for product cleanouts and inspections. Lastly, you can include up to two different aspirated fractions for added separation capabilities.
The Rotex Minerals Separator™ drive is used to generate the legendary Rotex Gyratory Reciprocating Motion.
Screen access and changes are easier than ever with the Rotex customized DESTACO door clamps.
The Rotex sliding inlet eliminates the hassle associated with flexible connections.
The Rotex Minerals Separator™ incorporates brush discharge connections to eliminate troublesome flexible outlet connections.
The Rotex hanger assembly integrates two universal joints at each connection point at the top and bottom.
Rotex drive heads come in three configurations.
The drag link is a physical connection that attaches the screen box assembly to the machine base. This connection converts the gyratory motion created by the drive head to reciprocating motion for precise, near-size separation.
The screen access doors allow for toolless entry, single-operator maintenance and inspections, and independent screen deck access. This means you can change the fourth deck without removing decks one, two and three, saving time and effort by directly accessing the screens that are most likely to fail first. The screens are removed through the use of toolless cams that raise and lower the individually pre-tensioned panels. With each screen change you also receive a brand-new seal, ensuring zero product contamination.
Inspection ports are located on the top cover of the machine. When the machine is stopped, you can easily remove the inspection cap and ensure the screener is operating correctly. This could include inspections for screen blinding, screen tears or material buildup.
Rotex customizes each machine configuration to match the exact application needs. Inlet connection options include:
Rotex customizes each machine configuration to match the exact application needs. Outlet connection options include:
The APEX™ discharge chute offers easily accessible outlets and customizable outlet configurations. Outside of the outlets, you can also customize the discharge chute by adding hinges to improve accessibility for product cleanouts and inspections. Lastly, you can include up to two different aspirated fractions for added separation capabilities.
常规筛分机在处理更高产量时料层厚度会增加,这会降低筛分机进行物料分级的能力,物料分级能力对于有效筛分至关重要。扩大筛面面积是增加筛分产量的关键,由于并非所有筛网区域都具有相同的筛分能力,增加筛面宽度比增加筛面长度能更有效的增加产能。MEGATEX筛分机使用更宽而非更长的筛面来处理更大的产能且同时保证筛分精度。MEGATEX筛分机使用双排多层式筛面布置,宽度分别为40英尺和50英尺(12米和15米)。这个宽度可保持较薄的料层厚度,因此在高产量时同样可以保持筛分精度和效率。
长行程(高达 7.5 厘米)低频驱动装置产生的水平力具有两个重要功能。首先,该运动有效地将材料均匀散布在分料器上。这实现了对设备内每个筛分单元的按比例进料,并不需要多个工艺进料口。其次,长行程和低频特性产生有效的筛网清洁效果,为设备长期、不间断运行保驾护航。